铭宏润滑油脂科技

400-6080-328

文章
  • 文章
搜索
首页 >> 产品中心 >>特种专用润滑脂 >> 防水密封润滑脂
详细说明

防水密封润滑脂

产品简介
玖城牌防水密封润滑脂采用氟硅油为基础油,聚四氟乙烯(PTFE)为稠化剂并加有抗氧化、抗腐蚀等精制而成。JC Waterproof seal grease,the use of Fluorosilicone oil as base oil, polytetrafluoroethylene (PTFE) as thickening agent add the addition of antioxidants, anti-corrosion agents and other refined.
收藏
产品编号 SG3301 SG3302 SG3303
  • 产品说明
  • 产品参数

玖城牌防水密封润滑脂

产品型号:SG3301 SG3302 SG3303

产品描述:玖城牌防水密封润滑脂采用氟硅油为基础油,聚四氟乙烯(PTFE)为稠化剂并加有抗氧化、抗腐蚀等精制而成

产品特点:

优异的抗水性和密封性,耐冷、热水,抗环境老化

优良的高、低温性能和抗氧化性能,稠度随温度变化小

优良的耐油性、耐腐蚀性和耐大部化学品,使用寿命极长

极佳的粘附性和润滑性,与绝大多数塑料和弹性体良好相容

产品应用:

用于塑料、橡胶、金属之间及密封件的润滑与密封。

用于阀门、旋塞、柱塞、衬垫、O形圈和楔型密封器的防水、密封润滑及防腐蚀

用于玩具、电器、仪表、卫浴器材、电子元件、电缆接头、绝缘端子的防水、密封、绝缘及防潮

使用温度:-40℃~200℃

JC Waterproof Seal Grease

Product number:SG3301 SG3302 SG3303

product description:

JC Waterproof seal grease,the use of Fluorosilicone oil as base oil, polytetrafluoroethylene (PTFE) as thickening agent add the addition of antioxidants, anti-corrosion agents and other refined.

Performance characteristics:

Excellent resistance to water and sealing, cold , hot water, anti - environmental aging.

Excellent high and low temperature performance and oxidation resistance,Consistency is constant with the change of temperature.

Excellent oil resistance, corrosion resistance and resistance to most chemicals, very long service life;

Excellent adhesion and lubrication, compatible with most plastics and elastomers.

Recommended use:

It is used for lubrication and sealing between plastic, rubber, metal and seals.

Waterproof, sealed lubrication and anti-corrosion for valves, cocks, plunger, gaskets, o-rings and wedge seals;

It is used for waterproof, sealing, insulation and moisture proof of toys, electrical appliances, meters, bathroom fittings, electronic components, cable joints and insulation terminals.

Temperature range:-40℃ to 200


玖城牌防水密封润滑脂的典型数据Typical data of JC Waterproof seal grease:

项目Project

典型数据Typical data

外观 Appearance

白色光滑均匀油膏

工作锥入度/0.1mm 60 Penetration 1/10mm 60 times

235--285

滴点,  Drop point,℃

340

铜片腐蚀(T2.100.24h Copper corrosionT2.100.24h

合格PASS

水淋流失量(79,1h Sprinkling loss79,1h%

1.1

钢网分油(100,24h Steel mesh oil filtering100,24h%

1.2

防腐蚀性(52,48h Corrosion resistance52,48h

合格 PASS

极压性能(四球机法)Pa/kg  Extreme pressure performance (4-ball test)Pa/kg

580

蒸发度(120,m/m Evaporativity120,m/m%

≤1

EMCOR防锈实验,10%合成海水

EMCOR antirust experiment, 10% synthetic sea water

0.0(无锈)

(No rust)

适用工作温度 Applicable working temperature 

-40--+200

标题
更多
联系方式:
留言内容.....:

联系我们

24小时服务热线

400-6080-328

电话:0512-68792639

邮箱:m@jc.hk.cn

QQ:1185166919

地址:苏州市吴中区前珠路1号2幢

底部导航

在线留言

关注我们

×