铭宏润滑油脂科技

400-6080-328

文章
  • 文章
搜索
首页 >> 产品中心 >>锂基硫钼白色脂 >> 二硫化钼润滑脂
详细说明

二硫化钼润滑脂

产品简介
玖城牌二硫化钼润滑脂采用12羟基硬脂酸锂皂稠化深度精制的矿物基础油,添加二硫化钼抗磨添加剂精制而成。JC Molybdenum disulphide grease is using of Mineral base oil for deep thickening of 12 hydroxystearate lithium stearate soap,add molybdenum disulfide antiwear additive refined.
收藏
产品编号 HP0 HP1 HP2 HP3
  • 产品说明
  • 产品参数

玖城牌二硫化钼润滑脂

产品型号:HPHPHPHP3

产品描述:玖城牌二硫化钼润滑脂采用12羟基硬脂酸锂皂稠化深度精制的矿物基础油,添加二硫化钼抗磨添加剂精制而成。

产品特点:

优异的极压抗磨性能,摩擦系数低,承载能力强

优良的金属表面吸附性和防锈性,工作温度范围宽泛。

优异的耐水冲刷性能和耐腐蚀性能,抗氧化性能好。

优良的机械安定性和胶体安定性,极长的使用寿命。

产品应用:

用于中重负荷设备的轴承、联轴节、齿轮等部位的润滑

用于温度变化范围大,带有冲击或振动负荷的轴承润滑

用于某些轴瓦、轴销、滑轨、齿轮、链条和钢丝绳的润滑

用于冶金、矿山企业的中重负荷设备的轴承、联轴节、齿轮等部位润滑

使用温度:-30℃~180℃

JC Molybdenum Disulphide Grease

Product number:HPHPHPHP3

product description:JC Molybdenum disulphide grease is using of Mineral base oil for deep thickening of 12 hydroxystearate lithium stearate soapadd molybdenum disulfide antiwear additive refined.

Performance characteristics:

Excellent extreme pressure and abrasion resistance, low friction coefficient and strong bearing capacity.

Excellent metal surface adsorption and rust resistance, wide range of working temperature.

Excellent water  resistance and corrosion resistance, good oxidation resistance.

Excellent mechanical stability and colloidal stability, very long service life.

Recommended use:

Used for lubrication of bearing, coupling, gear and other parts of heavy duty equipment.

Used for lubrication of bearings with a large range of temperature variations with impact or vibration loads.

Used for lubrication of certain bearing shells, axle pins, slide rails, gears, chains and wire ropes.

Used for the lubrication of bearing, coupling, gear and other parts of heavy duty equipment in metallurgy and mining enterprises.

Temperature range:-30℃ to 180


玖城牌二硫化钼润滑脂的典型数据Typical data of JC Molybdenum disulphide grease:

项目Project

典型数据Typical data

外观 Appearance

黑色均匀油膏

工作锥入度/0.1mm 60 Penetration 1/10mm 60 times

235--285

滴点,  Drop point,℃

300

铜片腐蚀(T2.100.24h Copper corrosionT2.100.24h

合格PASS

水淋流失量(79,1h Sprinkling loss79,1h%

1.0

钢网分油(100,24h Steel mesh oil filtering100,24h%

1.5

防腐蚀性(52,48h Corrosion resistance52,48h

合格 PASS

极压性能(四球机法)Pa/kg  Extreme pressure performance (4-ball test)Pa/kg

544

蒸发度(120,m/m Evaporativity120,m/m%

≤1

EMCOR防锈实验,10%合成海水

EMCOR antirust experiment, 10% synthetic sea water

0.0(无锈)

(No rust)

适用工作温度 Applicable working temperature 

-30--+180

标题
更多
联系方式:
留言内容.....:

联系我们

24小时服务热线

400-6080-328

电话:0512-68792639

邮箱:m@jc.hk.cn

QQ:1185166919

地址:苏州市吴中区前珠路1号2幢

底部导航

在线留言

关注我们

×